The Anti-Dropout wireless combines RF interference-free transmission with easy-to-use dynamic control.
The receiver has one 1/4 inch output jack that combines the outputs of the two transmitters.
If you need independent outputs, there is an Optional Dual Output Adapter Cable,
One end of the cable has a 1/4 inch plug and the other ends have two balanced XLR output connectors - one XLR for each output signal.
The receiver's AC adaptor operates from 100 to 240 AC input voltage.
When we ship your receiver to an address in the USA we include an AC adaptor plug that fits into a standard 3-prong or 2-prong US power outlet.
Otherwise, we include two AC adaptor plugs - one for EU power outlets and another one for US power outlets.
When your system arrives, you can choose the appropriate plug for your outlet. The plug snaps-on to the AC adaptor.
The transmitter requires two AA batteries which are not included.
Each transmitter has a programming knob located inside the battery compartment.
To setup the internal dynamic control processor, just snap-off the cover to access the knob.
Then rotate the knob until the receiver's channel LED flashes.
If the LED flashes all the time when the transmitter is in use, turn the knob counterclockwise.
If the LED never flashes when using the transmitter, turn the knob clockwise until it flashes occasionally at peak sound input.
User Manual (pdf)
Specifications are subject to change without notice.
© 2020 Music44.com, Inc. All rights reserved.